Important information on macOS 11 Big Sur
Please install the Yamaha Steinberg USB driver first, then run the TOOLS installation!
- SmartPssEngMacISV2.00.0.R.20170120Codesign Project Name SmartPSS Version V2.00.0 Base Platform Based on the Windows V2.00.0 functions Operation Platform Mac OS X 10.7 or higher New Functions 1. New functions page a) The New function page can.
- Lazarus is a free and open source development tool for the Free Pascal Compiler. The purpose of this project is to serve as a Code Repository, Wiki Knowledgebase and support site for converting existing components and libraries to work with Lazarus and the Free Pascal Compiler.
- Apple 13in MacBook Air, 1.8GHz Intel Core i5 Dual Core Processor, 8GB RAM, 128GB SSD, Mac OS, Silver, MQD32LL/A (Newest Version) (Renewed) Apple MacBook Air MJVE2LL/A 13.3-Inch Laptop Intel Core i5 1.6GHz, 256GB Flash Drive, 8GB DDR3 Memory, OS X Yosemite (2015 VERSION) (Renewed).
- Using the software, you can also modify the basic network information including IP address, subnet mask, gateway, etc. Attention: Supprt Mac OS 10.10 and above version. SADP for windows Software Description: Search Active Devices Protocol software is user-friendly and installation-free online device search tool.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
MacMac OS X 10.12.6 · macOS 10.13.6* · 10.14.x* · 10.15.x* · 11.x* | April 16, 2020 WindowsWindows 7 SP1 · Windows 8.1 · Windows 10 |
TOOLS for UR28M 2.2.1 · 342 MB Release Notes (PDF) *Important information on the installation! | TOOLS for UR28M 2.2.1 · 279 MB Release Notes (PDF) |
Included components
| Included components
|
Important: Firmware V2.10 or higher is required. |
Yamaha Steinberg USB Driver
The TOOLS for UR come with a Yamaha Steinberg USB driver component included. However, a newer version of the driver for your USB audio interface might be available on this page.The driver component can be updated separately in this case.
This version contains the native plug-ins incl. an AAX version.
Please note that a Basic FX Suite license is required to use the plug-ins!
MacmacOS 10.13 · 10.14 · 10.15 · 11.x | January 12, 2021 WindowsWindows 10 (64-Bit) |
Basic FX Suite V1.5.1 · 400 MB Release Notes (PDF) | Basic FX Suite V1.5.0 · 352 MB Release Notes (PDF) |
TOOLS for UR28M V2.1.0 or higher are required.
Please note the 'Update Guide' that is included in the ZIP file.
MacmacOS 10.12 · 10.13 · 10.14 · 10.15 | October 23, 2014 WindowsWindows 7 SP1 · Windows 8.1 · Windows 10 |
UR28M Firmware Updater V2.11-2 · 11 MB Oktober 23, 2014 Installer for Mac OS X 10.7.5 - 10.11 UR28M Firmware Updater V2.11 · 12 MB Includes the same firmware. | UR28M Firmware Updater V2.11 · 3.8 MB |
Release Notes (PDF) |
Open Mac OS 8.1 Update installer, in Options uncheck ‘Update Apple Hard Drive Drivers'. Run Mac OS 8.1 Update installer. After installer is done, restart with 7.0.1 Disk Tools floppy and do: ResEdit hacks to 8.1 System file:. Replace ‘gbly' resource ‘ID -16385' with the same resource from ‘os8-030patch.rsrc'.
The online help and PDF manuals are available on steinberg.help.
In case you run an older Windows or Mac OS X version, please find related downloads below.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
MacMac OS X 10.11 · macOS 10.12 · 10.13 · 10.14 |
TOOLS for UR28M 2.2.0 · 371 MB Release Notes (PDF) |
Included components
|
Important: Firmware V2.10 or higher is required. |
TOOLS for UR28M V2.1.6 for Mac
- Yamaha Steinberg USB Driver V1.9.10-2
- Basic FX Suite V1.0.1
- Steinberg UR28M Applications V2.1.6:
- Steinberg UR28M Extension V2.1.6
- Steinberg dspMixFx UR28M V2.1.5
- Installation guide and operation manual
How to install
Extract the downladed ZIP file by double-clicking on it. Another double-click on the 'Tools for UR28M' package starts the installation.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
Important: Firmware V2.1.1 or higher is required.
TOOLS for UR28M V2.1.6 for Windows
- Yamaha Steinberg USB Driver V1.9.11
- Basic FX Suite V1.0.1
- Steinberg UR28M Applications V2.1.6:
- Steinberg UR28M Extension V2.1.6
- Steinberg dspMixFx UR28M V2.1.3
- Installation guide and operation manual
How to install
Extract the downladed ZIP file by double-clicking on it. Another double-click on the 'setup.exe' starts the installation.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
Important: The TOOLS for UR28M V2.1.4 require the Firmware V2.1.0 or higher.
November 30, 2017 MacMac OS X 10.9.5 · 10.10.5 · 10.11 · macOS 10.12 · 10.13 | WindowsWindows 7 SP1 · Windows 8.1 · Windows 10 |
TOOLS for UR28M 2.1.6 · 224 MB Release Notes Mac · PDF | TOOLS for UR28M 2.1.6 · 247 MB Release Notes Windows · PDF |
TOOLS for UR28M V2.1.2 for Mac OS X
March 26th, 2015 Trace (goldsmitha20) mac os.
- Yamaha Steinberg USB Driver V1.9.2
- Basic FX Suite V1.0.1
- Steinberg UR28M Applications V2.1.2:
- Steinberg UR28M Extension V2.1.2
- Steinberg dspMixFx UR28M V2.1.2
- Installation guide and operation manual
How to install
Extract the downladed ZIP file by double-clicking on it. Another double-click on the 'Tools for UR28M' package starts the installation.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
Important: The TOOLS for UR28M V2.1.2 require the firmware V2.1.1 or higher.
352 (resistjam Version) Mac Os Catalina
Mac OS X |
Mac OS X 10.7.5 · 10.8 · 10.9 · 10.10 |
TOOLS for UR28M 2.1.2 · 220 MB |
Release Notes Mac OS X (PDF) |
352 (resistjam Version) Mac Os X
TOOLS for UR28M · Version 1.1.3 & Version 1.1.4
352 (resistjam Version) Mac Os Download
The TOOLS for UR28M 1.1.3/1.1.4 include the following components:
- Yamaha Steinberg USB Driver 1.7.3
- Steinberg UR28M Applications 1.1.3
- Documentation: Getting Started, Operation Manual
How to install
Extract the downladed ZIP file by double-clicking on it. Another double-click on the 'Setup.exe' (Windows) or the 'Tools for UR28M' package (Mac) starts the installation.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
Mac OS X | Windows |
Mac OS X · 10.5.8 · 10.6 · 10.7 · 10.8 | Windows XP · Vista · 7 · 8 |
Tools for UR28M 1.1.3 · 217 MB | Tools for UR28M 1.1.4 · 32-Bit · 130 MB Tools for UR28M 1.1.4 · 64-Bit · 175 MB |
Release Notes · PDF · ca. 120 KB Deutsch · English · Français · Castellano · Italiano | Release Notes · PDF · 800 KB |
UR28M FIRMWARE UPDATE V1.10 (Windows) & 1.10-3 (MAC OS X)
With the new firmware, the input signal level of line input 3/4 can be selected between +4 dBu and -10 dBv.
Mac OS X only (V1.1.3-3): The update program now supports Gatekeeper. The firmware version is the same as before.
Mac OS X | Windows |
Mac OS X 10.5.8 · 10.6 · 10.7 · 10.8 | Windows XP SP3 · Vista SP 2 · 7 |
UR28M Firmware V1.10-3 · 22.0 MB | UR28M Firmware V1.10 · 3.7 MB |
Project Name SmartPSS
Version V2.00.0
Base Platform Based on the Windows V2.00.0 functions
Operation Platform Mac OS X 10.7 or higher
New Functions
1. New functions page
a) The New function page can replace homepage
b) The New function page allows you to customize the order of function module is
2. System Config
a) Supports setup of the tab shown when the software boots up
b) Support to set the default ratio of the video
c) Support auto fill in user name and password, enable auto login when users add device
d) Support system config backup and restoration
3. Device Management
a) Support to modify the IP address of the device automatically searched
4. Preview
a) Support fixed-dome camera link.
b) Support remote channel talk with NVR, HCVR, etc.
5. Playback
a) New device video file list which support filtering video types
b) Add local video, file list, support thumbnail, list switch display
c) Picture play supports automatically play next, also supports full-screen play
d) Support reverse play, single frame backward
e) Search recording type Add the intelligent recording type
6. Video Wall
a) Brand new Video wall, compatible matrix, decoder, splicing controller
b) Support a variety of open window method
c) Support playback stream on the wall
d) Support the window tour, plan tour
e) Support NKB1000 control
7. PC-NVR
a) Support to manage PC-NVR on other Windows
8. Tour Program
a) Add a window tour function
b) If it is a dome camera, it can be set to shift to specified preset point
c) You can set the stream type for tour video
9. Heat Map
a) Support heat map data statistics (need front-end device support)
10. Device Config
a) New device upgrade function
352 (resistjam Version) Mac Os Catalina
Mac OS X |
Mac OS X 10.7.5 · 10.8 · 10.9 · 10.10 |
TOOLS for UR28M 2.1.2 · 220 MB |
Release Notes Mac OS X (PDF) |
352 (resistjam Version) Mac Os X
TOOLS for UR28M · Version 1.1.3 & Version 1.1.4
352 (resistjam Version) Mac Os Download
The TOOLS for UR28M 1.1.3/1.1.4 include the following components:
- Yamaha Steinberg USB Driver 1.7.3
- Steinberg UR28M Applications 1.1.3
- Documentation: Getting Started, Operation Manual
How to install
Extract the downladed ZIP file by double-clicking on it. Another double-click on the 'Setup.exe' (Windows) or the 'Tools for UR28M' package (Mac) starts the installation.
Before running the installation, please read the 'Installation Guide' inside the 'TOOLS for UR28M' folder carefully.
Mac OS X | Windows |
Mac OS X · 10.5.8 · 10.6 · 10.7 · 10.8 | Windows XP · Vista · 7 · 8 |
Tools for UR28M 1.1.3 · 217 MB | Tools for UR28M 1.1.4 · 32-Bit · 130 MB Tools for UR28M 1.1.4 · 64-Bit · 175 MB |
Release Notes · PDF · ca. 120 KB Deutsch · English · Français · Castellano · Italiano | Release Notes · PDF · 800 KB |
UR28M FIRMWARE UPDATE V1.10 (Windows) & 1.10-3 (MAC OS X)
With the new firmware, the input signal level of line input 3/4 can be selected between +4 dBu and -10 dBv.
Mac OS X only (V1.1.3-3): The update program now supports Gatekeeper. The firmware version is the same as before.
Mac OS X | Windows |
Mac OS X 10.5.8 · 10.6 · 10.7 · 10.8 | Windows XP SP3 · Vista SP 2 · 7 |
UR28M Firmware V1.10-3 · 22.0 MB | UR28M Firmware V1.10 · 3.7 MB |
Project Name SmartPSS
Version V2.00.0
Base Platform Based on the Windows V2.00.0 functions
Operation Platform Mac OS X 10.7 or higher
New Functions
1. New functions page
a) The New function page can replace homepage
b) The New function page allows you to customize the order of function module is
2. System Config
a) Supports setup of the tab shown when the software boots up
b) Support to set the default ratio of the video
c) Support auto fill in user name and password, enable auto login when users add device
d) Support system config backup and restoration
3. Device Management
a) Support to modify the IP address of the device automatically searched
4. Preview
a) Support fixed-dome camera link.
b) Support remote channel talk with NVR, HCVR, etc.
5. Playback
a) New device video file list which support filtering video types
b) Add local video, file list, support thumbnail, list switch display
c) Picture play supports automatically play next, also supports full-screen play
d) Support reverse play, single frame backward
e) Search recording type Add the intelligent recording type
6. Video Wall
a) Brand new Video wall, compatible matrix, decoder, splicing controller
b) Support a variety of open window method
c) Support playback stream on the wall
d) Support the window tour, plan tour
e) Support NKB1000 control
7. PC-NVR
a) Support to manage PC-NVR on other Windows
8. Tour Program
a) Add a window tour function
b) If it is a dome camera, it can be set to shift to specified preset point
c) You can set the stream type for tour video
9. Heat Map
a) Support heat map data statistics (need front-end device support)
10. Device Config
a) New device upgrade function
Revised Function
1. After first-time installation is complete and set the admin password, you can choose to log in automatically
2. Smart track and fixed linkage is called master-slave tracking
3. You can select a group when saving view
4. Split window can now be add to favorite, and only show the user's latest three
5. Manual snapshot is now directly saved, no need of user confirmation
6. PTZ control panel can now be put away, a user can call out as needed
7. When you delete a device in Device Management, you can now choose to keep its snapshot and video
8.;In playback in progress you can directly search device picture and play
9.For video cut now you need to set the start and end points
10. Timeline zoom is now centered on the current mouse position
11. When downloading video, you can be directly open the folder where video locates in the pop-up box.
12. Alarm management is now changed to 'Event'
13. You can now add note, process, and record the personnel and time of the event. Once processed, the status cannot be changed
14. Open the associated video in the event to view its local recording, device recording, or live video
15. You can now disable the alarm sound and alarm pop-up in the event
16. The traffic statistics is now changed to 'statistics' and supports searching the data on the NVR
17. The alarm config is now changed to 'Event Settings'
18. Event settings now for the device, the channel create different types of event
19. Event settings now allow you to set whether to specify the alarm sound alarm, map flashes, and you can set the linkage of the pop-up.
20. Device config re-adjust the and classification, and now it is almost the same with device web config classification
21. For users without menu right now, the corresponding menu is no longer displayed after login
22. For users without channel right now, the corresponding channel is no longer displayed after login
23. Support SmartH.265 decoding
Note
This version cannot be compatible with device program before intelligentization, if to use the intelligent alarm-related features, please upgrade the device program to the assorted version.
Download Here –> http://www1.dahuasecurity.com/download_detail_162.html